Industrial Welding Technology
2019-20 Industrial Welding Technology (PDF)
Associate of Applied Science Degree
Courses for this Program
About the Program
The Associate of Applied Science degree in Industrial Welding Technology is designed for students
whose goals are to enter the job market as entry-level welders/fabricators. Upon completing
the program, students will be qualified to test for certification to the American Welding Society
(AWS) D1.1-06 Structural Steel Welding Codes and the AWS D1.3-08 Sheet Steel Welding Code.
Students would also be able to test to certify as pipe welders to the American Society of Mechanical
Engineers (ASME) Section IX Welding Code, and as Level I Entry Level and Level II Advanced
Level Welder by the AWS EG2.0 and 3.0 welder training programs.
Additionally, students will have a good foundation in structural steel layout, pipefitting, and sheet
metal pattern development. Students will also be prepared with mathematics and communication
skills and be knowledgeable of the human relations skills necessary to become valuable employees in
the industrial welding field.
If students intend to transfer to SOU’s Bachelor of Applied Science degree program, transfer courses
should be chosen from the list of electives where possible. See an advisor for more information or visit www.sou.edu/degreecompletion.
Program Learning Outcomes
The curriculum in RCC courses is derived from a set of identified learning outcomes that are relevant to the discipline. Program learning outcomes for industrial welding are:
Show a serious commitment to a culture of safety in all college and work environments.
Produce industry quality weldments on carbon steel plate in various joint and groove configurations.
Processes include oxy fuel cutting, plasma arc cutting, SMAW, GMAW and FCAW.
Produce industry-quality welds using GTAW, GMAW and FCAW on stainless steel and aluminum plate.
Produce industry-quality welds on various diameters of carbon steel pipe in the 5g and 6g positions using SMAW electrodes E6010 and E7018.
Develop a logical sequence of steps to foresee, troubleshoot, and resolve mechanical and process issues that may arise in the workplace.
Interpret and create mechanical blueprints to industry standards.
Layout and fabricate industry-quality fabrication projects using shearing and forming equipment.
Demonstrate a commitment to the professional standards of the industry.
Entry Requirements
Students are required to complete the Placement Process to determine skill level and readiness in math, reading, and writing. As part of their training program, students must begin with the courses within their skill level as determined through the Placement Process. In addition, students may also be required to enroll in classes that would increase their employability and success.
Advanced Standing
Coursework from accredited colleges and universities will be accepted in accordance with college
policies. In order to ensure that coursework is current, program courses over three years old must
be reviewed and approved by the appropriate department chair before being accepted toward core
requirements. College Now credit will be accepted in accordance with current agreement. Verified
industry experience may be substituted for some coursework in accordance with college policy and
the department chair’s approval.
Credits earned in the successful completion of Career Pathways certificates can be applied to other
certificates and degrees in the Career Pathway. For more information, speak to a program advisor
and review the roadmap at www.roguecc.edu/Programs/CareerPathways.
Graduation Requirements
Students must complete all courses in this program with a grade of “C” or better to receive their degrees. Certain required courses are graded on a pass/no pass basis only. A grade of “P” for these courses indicates a student earned the equivalent of a “C” or better grade.
Prerequisites |
||
Course No. |
Course Title |
Credits |
BT113 | Business English I or WR115 Introduction to Expository Writing or higher level composition 1 |
3-4 |
CS/CIS__ | Approved 3-4 credit Computer Science or Computer Information Science class, CS/CIS120 or above or documented computer proficiency within the past ten years. 1 | 0-4 |
MEC102 | Basic Hand Tools or demonstrated proficiency | 0-3 |
MTH20 | Pre-algebra or designated placement test score | 0-4 |
Total Prerequisite Credits | 3-15 | |
First Year Required Courses |
||
Course No. |
Course Title |
Credits |
First Term |
||
HE112 | Emergency First Aid | 1 |
MTH63 | Applied Algebra I or MTH60 Fundamentals of Algebra I or higher level math |
4 |
MET101 | Mechanical Drafting | 3 |
WLD111 | Technology of Industrial Welding I | 6 |
14 |
||
Second Term |
||
LIB127 | Introduction to Academic Research or LIB101 Introduction to Information Literacy |
1 |
WLD104 | Blueprint Reading - Mechanical | 3 |
WLD112 | Technology of Industrial Welding II | 6 |
WLD121 | Fabrication and Repair Practices I | 5 |
15 |
||
Third Term |
||
BT101 | Human Relations in Organizations or PSY101 Psychology of Human Relations |
3 |
BT114 | Business English II or WR121 English Composition I or higher level composition 2 |
3 |
WLD113 | Technology of Industrial Welding III | 6 |
WLD | Fabrication and Repair Practices II | 5 |
18 |
||
Total First Year Credits |
47 | |
Second Year Required Courses |
||
Course No. |
Course Title |
Credits |
Fourth Term |
||
GS104 | Physical Science with lab or approved program elective | 3-4 |
MFG121 | Manufacturing Processes I | 4 |
WLD211 | Technology of Industrial Welding IV | 6 |
WLD220 | Machine Tool Maintenance and Repair | 3 |
WLD221 | Welding Codes, Procedures and Inspections | 3 |
19-20 |
||
Fifth Term |
||
MEC103 | Industrial Safety | 1 |
MEC114 | Safety for Industry | 4 |
WLD212 | Technology of Industrial Welding V | 6 |
WLD225 | Industrial Metallurgy or MET160 Materials and Metallurgy |
3 |
13 | ||
Sixth Term |
||
WLD213 | Technology of Industrial Welding VI | 6 |
WLD280 | Cooperative Work Experience/Welding or WLD250F Capstone |
3 |
_____ | Approved program elective(s) | 3-6 |
11-15 | ||
Total Second Year Credits |
43-48 | |
TOTAL PROGRAM CREDITS |
90-95 | |
Approved Program Electives (minimum of 3-6 credits required) |
||
Course No. |
Course Title |
Credits |
BA109 | Ready, Set, Work: Techniques for Landing a Job | 2 |
DS260 | Hydraulic Systems for Heavy Equipment with lab | 3 |
EET101 | Introduction to Electronics | 3 |
MEC116 | Quality Practices and Measurements | 3 |
MEC124 | Hoisting and Rigging I | 3 |
MEC125 | Pneumatics I | 3 |
MEC130 | Hydraulics I | 3 |
MEC149 | Electric Motor Control | 4 |
MET121 | Computer Aided Drafting I: Mechanical (SolidWorks) | 3 |
MET122 | Computer Aided Drafting II: Mechanical (SolidWorks) | 3 |
MET123 | Computer Aided Drafting III: Mechanical (SolidWorks) | 4 |
MFG122 | Manufacturing Processes II | 3 |
MFG123 | Manufacturing Processes III | 4 |
MFG211 | Manufacturing Power and Control Electronics | 4 |
MFG291 | Laser Cutting and Engraving Fundamentals | 2 |
WLD160 | American Welding Society (AWS) Certification Seminar: Plate | 1 |
WLD250 | Selected Topics in Welding | variable |
WLD250P | Selected Topics in Welding: CNC Plasma Cutting | 3 |
WLD260 | American Welding Society (AWS) Certification Seminar: Pipe | 1 |
Any college-level course numbered 100 or above | variable | |
1 Required for graduation. 2 Students must complete either BT113 and BT114 or WR115 and WR121 (or higher level composition classes). Three credits of speech may be substituted for 3-4 credits of writing. Students who have successfully completed the 3-credit versions of BT113 and BT114 will have met this requirement. |
For more information contact the Industrial Welding Department:
Grants Pass or Medford: 541-245-7809
Toll free in Oregon: 800-411-6508, Ext. 7809
email: welding@roguecc.edu
Web address: www.roguecc.edu/welding
TTY: Oregon Telecom Relay Service, 711